DIY: Install A Ceiling Fan On Your Own

By Brooke Davis

Do you have a bedroom that could use a ceiling fan to cool it down? Installing a ceiling fan on your own is relatively easy, if you are simply replacing a light fixture that is already in the appropriate location. Most of the wiring will already be available, so the only barrier will be replacing the pre-existing workbox with one that is accepted for the weight of a ceiling fan. Hanging your brand new ceiling fan on an established box that won't support the added weight of the fan could result in disaster. Before you begin your project, go through the guidelines for the fan you have bought, and make certain that you have all of the necessary tools.

If you are setting up the fan on a cathedral ceiling, you may want to acquire additional parts for extending the fan all the way down lower. Given that you are ready for the real installation, be sure that the breaker is put off, so no power is getting to the light you are replacing. After taking off the current light fixture, check to see if the installed workbox can manage the weight of your ceiling fan. Usually they aren't designed for a ceiling fan, so you will have to add further support. You will be able to do this fairly easily if you are able to gain access to the light fixture from the attic.

All that's necessary to do, is nail a 2x4 between the ceiling rafters, so that it touches the top of the workbox. Be positive that the 2x4 is attached and then bolt on the box to the wood. If you did it accurately, the excess weight of the fan really should be efficiently supported by the 2x4 wood and screws. If you dont possess access to the attic, you will have to place a cross bracing in your ceiling. It is more complicated to carry out and may not be that protected but its the greatest option if you have no attic access.

Now, after constructing the fan as stated by the instructions, you are ready to put your new fan. The hard part is keeping the fan, while joining the wiring. Relying on the fan, many come with a holding frame, and others contain a bracket with a J hook that lets you dangle the motor housing. Majority of fans employ a chain to operate the speed of the fan while the wall switch turns the device on or off. If you need a light kit together with your fan, they can be monitored by either chain or wall switch.

Cabling the fan is as easy as connecting two black wires, two ground wires and two white wires. As soon as you have accomplished the wiring, all you need to do now is connect the blades. Once that is completed, turn the breaker back on to check out the results.

About the Author:

For specific details visit hidroponia comercial. Also visit decoracion para baby shower.